atsushi arai Arai Helmets Jet , Arai x tend jet white helmets,arai defiant,Top Brand Wholesale Online arai rx q oriental,premier fashion designer
the x-tend open face helmet offers more:
more protection and more comfort. but also an even better fit, without affecting that feeling of freedom and the excellent view only an open face helmet has to offer. the outer shell of the x-tend offers three centimeters extended lower sides for more comfort and added safety. new holders and covered side vent exhaust complete the beautiful design of this outstanding touring helmet.
outer shell sfl (super fibre laminate):
this is the basic arai outer shell. super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
dual intake designed for increased airflow en lower noise level, guiding fresh, cool air into the interior.one-piece rear exhaust extracts
more hot air from the helmets interior and improves aerodynamics.
neck & side vent exhausts:
an enhanced exhaust port is built into the rear neck roll area to enhance hot-air extraction from the interior. side vent exhausts produce low pressure behind the rear vent for better hot air extraction, better aerodynamics, reduce wind noise en prevent buffeting at speed.
replaceable ear cups:
ear cups with their shock absorbing liner are offered in different thickness sizes, to make a more custom fit possible. there is much room around the ear area for better comfort and plenty of space for a communication device.
the outer shell has sides that are extended by three centimetres for more protection (as most impacts occur on the side of the helmet).
the ‘bumper’ is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity.
flares out for easier putting on and taking off.
facial contour system (fcs):
to offer an even better snug fit and enhancing the comfort to the lower jaw, the facial contour system (fcs) works with a foam spring support in
the cheek pad that compresses and rebounds
covers the arai visor mechanism, while ensuring maximum shell strength and a smooth dispersal of impact energy without deep recesses in
the shell surface.
five times inspected:
each arai helmet goes through five separate quality-control departments: after the shell is made, after painting and graphic completion,
after assembly and two in-process inspections.
the premium quality interior of any arai helmet can be easily cleaned, in place, with mild soap and lukewarm water
it can take up to five years for our experts to earn the right to create an arai shell. each shell can take up to 27 steps and to build one arai helmet will take about 18 man-hours.
all-day comfort with the arai interior fit and shape together with the finest liner materials and the extensive ventilation system. and thanks to the
perfect balance and weight distribution of the helmet, you hardly notice you are wearing an arai.
all arai helmets are penetration tested, although not required by european helmet standards. the arai penetration test is performed with a 3kg
test cone that strikes from a height of 3m on the helmet.
double-d ring device:
the flat and d-shaped rings fit smooth against the chin. no moving parts, no corrosion problems and just pulling the tab is enough to loosen
smooth shape, better protection:
the smooth outer shell of arai helmets is designed to glide without unnecessary resistance. you don’t want to decelerate your helmet more
than necessary. that’s why all arai vents and ducts are designed to break off during an impact.
hard outer shell, soft inner shell:
arai uses a very hard outer shell to spread impact forces and a soft inner shell to absorb remaining energy. the multiple-density eps inner shell is
made using a unique technology of combining three to five densities in various areas as a single component.
the organic shape of an arai outer shell offers a more natural appearance, seals better and conforms more to the head’s natural shape
for improved comfort, fit and to help minimize wind turbulence.
5-year limited warranty:
all arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years
from date of first use, but no more than 7 years from date of manufacture.
different outer shells:
unlike many other manufacturers arai provides one size outer shell for each two-helmet sizes for most models. together with different shaped outer shells for different models it is almost impossible not to find the fit you are looking for.
arai in-house test:
this arai helmet is designed to meet the stringent arai in-house standard requirements, in addition to mandatory standards such as ece 22-05 and voluntary standards such as snell m2010.
* helmets are always delivered with a transparent screen.
if you are interested in arai x tend
, you should know that it is in stock and offered at the best price. helmets
products from the brand arai
have the highest manufacturing quality. arai
is designing exclusive motorcycle
products that are tailored to the customers needs. so take a look through the offers available and buy your arai x tend
arai - helmets - jet,weight: up to 1400 gr,approval: ece-22.05,color: white